On beam characterization of ground-based CMB radio telescopes using UAV-mounted sources: application to the QUIJOTE TFGI and plans for LSPE-Strip
Fabio Paonessa, Lorenzo Ciorba, Giuseppe Addamo, Paz Alonso-Arias, Barbara Caccianiga, Marco Bersanelli, Francesco Cuttaia, Cristian Franceschet, Ricardo Tanausu Genova Santos, Massimo Gervasi, Roger Hoyland, Mike Jones, Carlos Hugo Lopez-Caraballo, Mauro Lumia, Michele Maris, Aniello Mennella, Gianluca Morgante, Oscar Antonio Peverini, Sabrina Realini, Jose Alberto Rubino-Martin, Stefano Sartor, Angela Taylor, Fabrizio Villa, Mario Zannoni, Giuseppe Virone
arXiv:2506.22617v1 Announce Type: new
Abstract: The Large Scale Polarization Explorer (LSPE) project, funded by the Italian Space Agency (ASI), includes the development of LSPE-Strip, a ground-based radio telescope for observing Cosmic Microwave Background (CMB) anisotropies. LSPE-Strip, nearing its construction phase, will operate from the Teide Observatory in Tenerife, employing 49 coherent polarimeters at 43 GHz to deliver critical data on CMB anisotropies and 6 channels at 95 GHz as atmospheric monitor. On-site characterization of such advanced instruments is crucial to detect possible systematic effects, such as gain fluctuations, beam distortions, and pointing errors, that can compromise performance by introducing spurious polarizations or radiation collection from unintended directions. To address these challenges, a drone-mounted Q-band test source for on-site characterization of LSPE-Strip’s polarimeter array was developed. Modern Unmanned Aerial Vehicles (UAVs) offer a flexible approach for antenna pattern measurements, yet their use in high-frequency radio astronomy is not consolidated practice. In October 2022, a UAV-based measurement campaign was conducted with the TFGI instrument on the second QUIJOTE telescope in Tenerife, in collaboration with the Instituto de Astrofisica de Canarias. This pioneering effort aimed to validate UAV-based beam characterization methods and assess QUIJOTE’s performance under operational conditions. Preliminary results demonstrated high measurement accuracy, leveraging QUIJOTE’s dual-receiver configuration for beam validation. These findings provide valuable insights for optimizing UAV systems in preparation for LSPE-Strip’s future characterization.arXiv:2506.22617v1 Announce Type: new
Abstract: The Large Scale Polarization Explorer (LSPE) project, funded by the Italian Space Agency (ASI), includes the development of LSPE-Strip, a ground-based radio telescope for observing Cosmic Microwave Background (CMB) anisotropies. LSPE-Strip, nearing its construction phase, will operate from the Teide Observatory in Tenerife, employing 49 coherent polarimeters at 43 GHz to deliver critical data on CMB anisotropies and 6 channels at 95 GHz as atmospheric monitor. On-site characterization of such advanced instruments is crucial to detect possible systematic effects, such as gain fluctuations, beam distortions, and pointing errors, that can compromise performance by introducing spurious polarizations or radiation collection from unintended directions. To address these challenges, a drone-mounted Q-band test source for on-site characterization of LSPE-Strip’s polarimeter array was developed. Modern Unmanned Aerial Vehicles (UAVs) offer a flexible approach for antenna pattern measurements, yet their use in high-frequency radio astronomy is not consolidated practice. In October 2022, a UAV-based measurement campaign was conducted with the TFGI instrument on the second QUIJOTE telescope in Tenerife, in collaboration with the Instituto de Astrofisica de Canarias. This pioneering effort aimed to validate UAV-based beam characterization methods and assess QUIJOTE’s performance under operational conditions. Preliminary results demonstrated high measurement accuracy, leveraging QUIJOTE’s dual-receiver configuration for beam validation. These findings provide valuable insights for optimizing UAV systems in preparation for LSPE-Strip’s future characterization.